• Specialty Carbide Flat Bottom Insert Blanks

    Non-Turnable blanks with two mounting holes

    Part No. W x H x T Grade
    4756 30x35.8x2 GP
    4832 30.5x25x1.5 GP
    4834 33x35x2 GP
    4694 60x30.2x2 GP
    4696 60x40.2x2 GP
    4702 60x40.4x2 HNW
    4698 60x41x3 GP
    4700 80x45x3 GP
    Part No. W x H x T Grade
    4708 35x35.3x2 GP
    4704 40x60.2x2 GP
    4706 40x50.3x2 GP
    4710 40x30.4x2 GP
    4712 50x30.4x2 HNW
    4714 50x30.4x2 HNW
    4836 80x25.5x2 GP
    4716 80x25.5x3 HNW

  • New Inserts for Universal Heads

    When ordering inserts with a “New” profile for a head NAP Gladu did not manufacture please provide:
    • Head Diameter
    • Hook Angle of the head
    • Manufacturer of the cutter head
    • Wood Sample or Drawing of the new profile
    • A sample Backing Plate that is used in the head.

    New Inserts for Dedicated Heads

    When ordering inserts with a “New” profile for a head NAP Gladu did not manufacture please provide:
    • An existing insert with the original pattern
    • Head Diameter
    • Hook Angle of the head
    • Manufacturer of the cutter head
    • Wood Sample or Drawing of the new profile
    • WARNING! Changes to the profile can only
      be small due to the steel body interference.
    Carbide Grades
    • General Purpose (GP): Used for man-made material and natural woods. Most common grade in the industry.
    • Natural Wood (NW): All natural wood applications including hard and softwoods
    • HI Natural Wood (HNW): High impact applications such as knots found in natural wood.
    • Man-Made Material (MM): Composite materials such as MDF, particle board, plywood, etc.